RA Series
Technical Specs
Where it is not specified ratings are for all models.

CONTINUOUS OUTPUT NOMINAL POWER *:
[both ch. driven from 20 hz to 20 Khz; THD < 0.1%]
*These power levels have been measured by very tight and severe Joule's law phisical effects, it is not possible to directly compare these values with declared values of other brand.
RA150m 1x 150Watt/4ohm @11Vbatt. 1x 240Watt/2ohm @11.5V batt.  
RA275 2x 75Watt/4ohm @11Vbatt. 2x 120Watt/2ohm  @11.5 Vbatt. 1x 240Watt/4ohm (bridged) @ 11.5 Vbatt.
RA475x 4x 75Watt/4ohm @11Vbatt. 4x 120Watt/2ohm @11.5 Vbatt. 2x 240Watt/4ohm (bridged) @ 11.5 Vbatt.
New RA220 2x 200Watt/4ohm @11.5V batt. 2x 250Watt/2ohm @12V batt. 1x 500Watt/4ohm (bridged) @ 12 Vbatt.

OUTPUT CURRENT [THD<1%; 20 hz to 20 Khz]:
RA150m 11 Arms continuous 18 Arms (100 mS peak)
RA275 8 Arms continuous 14 Arms (100 mS peak)
RA475x 8 Arms continuous 14 Arms (100 mS peak)
New RA220 12 Arms continuous 20 Arms (100 mS peak)

RA150m:
  • 18 db/oct low-pass and 12 db/oct high-pass cross-over built-in
  • separately adjustable from 250 Hz to 3.5KHz
  • low pass filter can reach full-range band pass allowing full-range mode
  • high-pass output for mid-high frequencies external amp - S/N > 110Db - Max output 5Vrms 
RA275:
  • adjustable bass-boost @40Hz (0/+12 Db max) 
RA475x:
 
  • 12 db/oct low-pass and 12 db/oct high-pass Cross-over built-in, separately turn-on onto each ch. pair
  • separately adjustable from 50 Hz to 3.5 Khz
  • straight by-pass allowing full-range mode

THD: less than 0.1 % until 1° clipping [20 hz to 20 Khz]
FREQUENCY RESPONSE [-3Db]: at 6 hz and more than 140 Khz (at nominal power into 4 ohm)
INPUT IMPEDANCE: 10 Kohm
INPUT SENSITIVITY: max 800 mVrms; min 4 Vrms
STEREO SEPARATION: 60 Db at 1Khz - (RA220x: 85Db)
SIGNAL TO NOISE RATIO: > 115 Db "A" weighted
CURRENT CONSUMPTION [at 12 Vbatt]:
RA150m idle 4 ohm 2 ohm

nominal power

0.9 A 24 A max 38 A max
RA275 idle 4 ohm (stereo) 2 ohm (stereo) 4 ohm (bridged)

nominal power

0.8 A 24 A max 38 A max 38 A max
RA475x idle 4 ohm (4ch.stereo) 2 ohm (4ch.stereo) 4 ohm (2ch. bridged)

nominal power

(0.8+0.8) A (24+24) A max (38+38) A max (38+38) A max
New RA220 idle 4 ohm (stereo) 2 ohm (stereo) 4 ohm (bridged)

nominal power

1.8 A 68 A max 85 A max 85 A max

PROTECT AT:
  • short on speakers outputs
  • battery voltage < 9 V
  • battery voltage > 15 V
  • thermal with proportional start of fans at 40° C, shutdown at 70° C
  • fully muted at turn on and off

DIMENSIONS AND WEIGHTS:
RA150m (234 x 188 x 42) mm 2 Kg
RA275 (234 x 188 x 42) mm 1.4 Kg
RA475x (325x 188 x 42) mm 3.2 Kg
New RA220 (325x 188 x 42) mm 3.5 Kg

Features could change without notice